KB200-11, KOALA Horizontal Earth Baby Changing Station
Order in the next
24 hours 00 minutes 00 seconds
to get same day shipping (Monday through Friday only)
Koala Kare KB200-11 Horizontal-Folding, Surface-Mounted Baby Changing Station in EARTH
Earth-Colored, Surface-Mounted Baby Changing Station
- Constructed of easy-to-clean, durable polypropylene in an attractive "EARTH" color.
- Bed surface contains MICROBAN antimicrobial additives which reduce odor causing bacteria.
- Has two built-in, locking liner dispensers.
- Contoured changing surface area is 450 sq. in (11,430 sq. mm) and comes complete with nylon safety strap and bag hooks.
- Easy to install using basic tools.
- Concealed gas spring mechanism ensures smooth, quiet open and close.
- Fully ASTM and EN compliant. Meets all ADA requirements when properly installed.
- FREE SHIPPING via UPS Ground to anywhere in the contiguous (lower 48 states) United States
- Backed by Manufacturer's Five-Year Limited Warranty on Materials and Workmanship.
- LEED Credit Eligible. Constructed with 16% recycled materials.
- Usually ships the same business day payment is received.
- Made in the U.S.A.
- Sanitary Liners (optional) also available for use with this item.
This durable and attractive Koala Kare baby changing station (Model KB200-11) is made of FDA approved, injection-molded, polypropylene with MICROBAN antimicrobial additive. The outer border of the Koala KB200-11 baby changing station is light brown in color with the remainder and majority of the changer being a tan color. The Koala KB200-11 is easy to clean and resistant to odors and bacteria growth. Graphics and safety messages are labelled in four (4) different languages. In addition, a built-in, locking dispenser for sanitary liners is conveniently located just above the changing surface when folded open (liners not included). Total capacity of the dual-cavity dispenser is approximately 50 liners.
The Koala KB200-11 baby changing station is designed to be surface mounted to the wall using the included hardware. Pre-drilled mounting holes are designed for wood studs on 16" centers. (For installation in wall that does not have wood studs 16" on center, metal studs, or concrete block, toggle fasteners may need to be purchased locally by the buyer.) The KB200-11 station folds down horizontally so the the adult is facing the wall while the infant is laying parallel to the wall. With a reinforced metal-on-metal hinge running the full length of the station and with 11-gauge steel mounting chassis, the KB200-11 meets all ASTM requirements for static load performance when properly installed. A pneumatic cylinder provides for easy, slow, and controlled opening and closing of the bed. Both the pneumatic cylinder and metal hinge mechanism are fully concealed (regardless of bed position) to eliminate tampering and possible pinch hazard. Although designed for infants that weigh no more than 50 lbs, in testing the KB200-11 easily supported 200 lbs with minimal deflection of the "bed" from horizontal.
The contoured changing surface area is 450 sq. in. and comes complete with nylon safety straps and convenient bag or purse hooks built in. Folded closed the changer's dimensions are 35"W x 22.25"H x 4"D. When open the changer extends out from the wall 22". And when properly installed, this Koala Kare changer complies with the highest Americans with Disabilities Act (ADA) regulations.
The concealed pneumatic cylinder and metal mounting chassis provides controlled and slow opening and closing of the bed. Polypropylene is easy to clean and resists odors and bacterial growth. The Koala KB200-11 baby changing station complies with ASTM static load performance requirements when properly installed.
The Koala KB200-11 baby changing station's body is made of durable, injection-molded polypropylene. The design of each Koala KB200-11 unit is to be surface-mounted and each is equipped with a pneumatic cylinder for a controlled opening and closing of the baby changing station. Each Koala KB200-011 station is secured to a metal mounting chassis with a concealed steel-on-steel hinge. None of the hinge structures are exposed on the interior or exterior surfaces. Each unit also comes with mounting hardware included and has Microban ® antimicrobial embedded into plastic material on the changing surface. The Koala KB200-11 baby changing station complies with ADA regulations when properly installed. It has a smooth concave changing area with a nylon safety strap and two hooks for bags or purses. Along with the safety strap and hooks, the Koala KB200-11 unit has a built-in Liner Dispenser for sanitary bed liners. The Koala KB200-11 baby changing station is also backed by the manufacturer’s 5-year limited warranty on materials and workmanship.