KB200-11, KOALA Horizontal Earth Baby Changing Station
Order in the next
24 hours 00 minutes 00 seconds
to get same day shipping
Koala Kare KB200-11 Horizontal-Folding, Surface-Mounted Baby Changing Station in EARTH
Earth-Colored, Surface-Mounted Baby Changing Station
FREE SHIPPING via UPS Ground to anywhere in the Contigious (lower 48) United States.
No Sales Tax
Backed by Manufacturer's Five-Year Limited Warranty on Materials and Workmanship.
LEED Credit Eligible. Constructed with 16% recycled materials.
Usually ships the same business day.
Made in the U.S.A.Sanitary Liners (optional) also available for use with this item.
This durable and attractive Koala Kare baby changing station (Model KB200-11) is made of FDA approved, injection-molded, polyethylene with MICROBAN antimicrobial additive. The outer border of the Koala KB200-11 baby changing station is gray in color with the remainder and majority of the changer being a very light gray with dark gray speckles. The Koala KB200-11 is easy to clean and resistant to odors and bacteria growth. Graphics and safety messages are molded into the polyethylene in four (4) different languages. In addition, two built-in dispensers for sanitary liners are conveniently located just above the changing surface when folded open (liners not included). Total capacity of the dual dispensers is approximately 50 liners.
The Koala KB200-11 baby changing station is designed to be surface mounted to the wall using the included hardware. Pre-drilled mounting holes are designed for wood studs on 16" centers. (For installation in wall that does not have wood studs 16" on center, metal studs, or concrete block, toggle fasteners may need to be purchased locally by the buyer.) The KB200-11 station folds down horizontally so the the adult is facing the wall while the infant is laying parallel to the wall. With a reinforced metal-on-metal hinge running the full length of the station and with 11-gauge steel mounting chassis, the KB200-11 meets all ASTM requirements for static load performance when properly installed. A pneumatic cylinder provides for easy, slow, and controlled opening and closing of the bed. Both the pneumatic cylinder and metal hinge mechanism are fully concealed (regardless of bed position) to eliminate tampering and possible pinch hazard.Although designed for infants that weigh no more than 50 lbs, in testing the KB200-11 easily supported 200 lbs with minimal deflection of the "bed" from horizontal.
The contoured changing surface area is 450 sq. in. and comes complete with nylon safety straps and convenient bag or purse hooks built in. Folded closed the changer's dimensions are 35"W x 22.25"H x 4"D. When open the changer extends out from the wall 22". And when properly installed, this Koala Kare changer complies with the highest Americans with Disabilities Act (ADA) regulations.
- FDA approved injection-molded polypropylene.
- Microban® antimicrobial additive embedded into the bed surface.
- Reinforced steel-on-steel hinge mechanism and metal mounting chassis with mounting hardware included.
- Contoured changing surface area is 450 sq. in (11,430 sq. mm) and comes complete with nylon safety strap and bag hooks.
- Dual cavity liner dispenser holds approximately fifty KB150-99 bed liners.
The concealed pneumatic cylinder and metal mounting chassis provides controlled and slow opening and closing of the bed. Polypropylene is easy to clean and resists odors and bacterial growth. The Koala KB200-11 baby changing station complies with ASTM static load performance requirements when properly installed.
The Koala KB200-11 baby changing station's body is made of durable, injection-molded polypropylene. The design of each Koala KB200-11 unit is to be surface-mounted and each is equipped with a pneumatic cylinder for a controlled opening and closing of the baby changing station. Each Koala KB200-011 station is secured to a metal mounting chassis with a concealed steel-on-steel hinge. None of the hinge structures are exposed on the interior or exterior surfaces. Each unit also comes with mounting hardware included and has Microban ® antimicrobial embedded into plastic material on the changing surface. The Koala KB200-11 baby changing station complies with ADA regulations when properly installed. It has a smooth concave changing area with a nylon safety strap and two hooks for bags or purses. Along with the safety strap and hooks, the Koala KB200-11 unit has a built-in Liner Dispenser with 3-ply chemical free biodegradable bed liners. The Koala KB200-11 baby changing station is also backed by the manufacturer’s 5-year limited warranty on materials and workmanship.