ALPINE® ALP404-GRY OAK™ High-Speed, Surface-Mounted, Hands-In Hand Dryer

by Alpine Industries

Order in the next

24 hours 00 minutes 00 seconds

to get same day shipping (Monday through Friday only)

Alpine OAK (ALP404-GRY) High-Speed, Surface-Mounted, Hands-In Hand Dryer

with Gray Polycarbonate ABS Cover

The OAK hand dryer by ALPINE INDUSTRIES is a vertical “hands in” hand dryer. This surface-mounted unit is high-speed, low-noise, and energy-efficient. Capable of taking the user’s hands from wet to dry in 8 to 10 seconds (2.5 times faster than traditional dryers), the OAK is quieter than most other high-speed hand dryers – only 70dB at HIGH speed. With a large hand opening, using the OAK truly is a touchless operation. As the user places his hands into the unit (without ever touching any surface), the infra-red sensors detect the hands. Once the user’s hands are removed, the dryer automatically turns off. Rather than blowing air over hands & blowing water into the floor & wall, the OAK has a drain incorporated into its hand drying cavity. The droplets of water blown off a user's hands are captured in a hygienic drainage tray, leaving the dryer, the wall, & the floor free of moisture and watermarks. Drain tank is located at the bottom of the hand dryer and can easily be removed and cleaned. Hands are fully dry in approx. 8 seconds, but the actual length of the run cycle is determined by the user. The energy-efficient motor can produce high air velocity and significant air volume but can do so without creating a loud noise. The faster dry time means less electricity is used. But the motor can be switched to a LOW speed setting when dry-time is not the chief concern. The OAK has high-efficiency heating element for comfort in colder conditions, but it, too, is adjustable. With the heating element is switched to OFF, even less electricity (and lower amperage) is consumed without affecting the dry time. The powerful brush-type motor spins at the rate of 20,000 times a minute while only requiring 700 watts to do so (1800 watts with the heating element ON). The OAK motor is powerful enough to draw all of its air through a dense, replaceable HEPA filter prior to ever touching the user’s hands. The silver-gray, high-impact Polycarbonate ABS cover is both durable and vandal resistant. Similar to the color molded bumpers found on today's automobiles, the durable, scratch-resistant plastic bounces back to its original form (even after a significant impact) free of damage. Simply utilize the included mounting bracket & template to affix the unit to the wall surface. Plus, the OAK has a plug-in option for even faster and easier installation. When properly installed, this dryer complies with the highest Americans with Disabilities Act (ADA) accessibility standards. Mounting instructions and warranty information are included.

Dimensions: 27-1/2" High x 11-3/4" Wide x 7-1/4" Deep; Weight: 20.5 lbs.

Electrical Specification:

  • LOW Voltage Version ALP404 (110V/120V; 60Hz)

WITH HEATING ELEMENT ON: 13.0 to 15.0 Amps; 1600 to 1800 Watts

WITH HEATING ELEMENT OFF: 5.8 to 7.0 Amps; 700 to 860 Watts

  • HIGH Voltage Version ALP404-20 (208V - 240V ; 60Hz)

WITH HEATING ELEMENT ON: 7.0 to 8.0 Amps; 1600 to 1800 Watts

WITH HEATING ELEMENT OFF: 3.2 to 3.9 Amps; 700 to 860 Watts

5 Year Limited Warranty against Manufacturer Defects.

Underwriters Laboratory, Inc. (UL) Listed. (In both the United States and Canada)

CE Certified (In both the United States and Canada)

FREE SHIPPING via FedEx Ground to anywhere in the Contiguous United States.

Made in China






You recently viewed

Clear recently viewed
woocommerce social proof