DYSON® Airblade™ AB04, Gray 120V Hand Dryer **DISCONTINUED** No Longer Available; Replaced by the DYSON AB14 dB (SKU #301853-01)

by Dyson
Sold out

Order in the next

24 hours 00 minutes 00 seconds

to get same day shipping (Monday through Friday only)



The Model AB04 (Steel-Grey) Airblade has been replaced by the updated Model AB14 dB (SteelGrey) Airblade (Now 50% Quieter)

The Dyson Airblade hand dryer works in just 12 seconds, literally scraping water from hands like a windshield wiper. It's also hygienic, forcing air through a HEPA filter before blowing it onto hands. And because it uses up to 80% less energy than warm air hand dryers, it costs less to run. It can also help lower a business carbon footprint - with no paper towels creating waste.

Electrical supply: 110-120 V AC, single phase 60 Hz
Rated power: 1400 W
Motor type: Dyson digital motor. Switched reluctance brushless
Motor speed: 81,000 rpm
Heater type: None

Standby power consumption: 1 W
Energy consumption per dry: 0.00468 kWh

Polycarbonate-ABS casing with homogenous anti-microbial additive
Color finish: Metallic steel finish PC-ABS
Anti-microbially integrated external plastics, seals and air ducts
Galvanized steel back plate / mounting bracket
Tamper-proof T30 type exterior screws
Water ingress protection to IPX5

HEPA filter with anti-microbial coating
99.97% particulate efficiency < 99.9% bacterial removal

Touch-free infra-red activation
Hand dry time: 12 seconds (measured to method defined by National Sanitation Foundation protocol P.335)
Airspeed output: 400 mph
Operating airflow: 68 CFM
Rated operating noise power: 85 dB(A)

Serial number prefix: A04-US
Single unit order code: 14225-01
Unit weight: 22 lb
Packaged weight: 28.7 lb
Packaged dimensions: 29.1 × 14.2 × 12.2
Pallet count: 13
Pallet type: US
Unit barcode: 879957002210

Standard warranty
5 year parts, 1 year labor limited

Product Certification
ETL listed in accordance with UL 507
ADA Compliant

*Recommended installation Male Female Child or heights measured from floor Disabled
x To top of machine 41.25 38.25 34.25
y To mounting bracket screw 39.0 36.0 32.0
z To bottom of machine 15.0 12.0 8.0

Manufactured materials
Plastic: ABS, PC/ABS, PC, PP (+ PPGF and PPTF), PET-TS
Thermoset (BMC/DMC), PEEK
Rubber: Styrene, butadiene, EPDM
Metal: Stainless steel, galvanized steel, zinc diecast alloy brass




You recently viewed

Clear recently viewed
woocommerce social proof